 |
|
|
|
|
PU mouldings are unbreakable, durable, lightweight, paintable, physically stable, borer-free, neat and easily installed, even by DO-IT-YOURSELF enthusiast, with either glueing or nailing. Our products are of higher density than most of other mouldings and this leads to a more consistent surface and tougher products, thus minimizing damage during transportation, handling and installation. We enhance our mouldings with greater depth of relief and sharper detail definition. Even after several layers of paint, Décor India Collection mouldings still offer sharp and highly visible relief patterns. Lastly, you will be assured of our competitive pricing at the highest quality standard.
Moulding Installation Guide : : :
Polyurethane mouldings may be installed much the same way you would install wood mouldings.
For a better fit, it is advised that a flat or "Butt Joint" is used to join longer lengths of polyurethane mouldings. Cut all pieces 1/8th of an inch longer than the required measurement, fitting the ends in place first and the middle sections last.
Always place a continuous bead of premium construction adhesive along all adjoining wall and ceiling surfaces before final positioning of the moulding. Adhesive is recommended when attaching one length of moulding to the next.
Filling and Sanding : : :
Once all of the mouldings are fixed in place, fill any joints or remaining voids with a paintable acrylic filler/caulking. This same caulking may be applied sparingly along the top and bottom edges of the moulding where it meets the ceiling and wall. A damp cloth or silicone coving tool may be used to clear away any excess caulking to leave a clean professional look.
Any remaining nail or screw holes may be filled with sandable, paintable non-shrinking filler. Be careful not to over sand the surfaces of your polyurethane mouldings. Sanding past the protective barrier undercoating may necessitate further filling and sanding to maintain a paintable surface.
Ceiling Roses : : :
Place a solid bead of premium adhesive around and about the backside of the ceiling rose. Pressing the piece into place, it may then be secured with 4 trim head dry wall screws. Be sure to place the screws so that any holes created may be filled and sanded with minimal effort.
Wall Niches : : :
Some surface mount wall niches may be hung temporarily using attached hardware or permanently using the same applicator procedures as for Ceiling Rose. Other niches available come complete with their own template and installation instructions.
Custom Designed Mouldings & Cornices : : :
We can help you realize your dreams. Decor India Mouldings & Cornices has a full design shop capable of turning your wildest ideas into unbelievable realities. Contact us if you have a designing mind and would like to take advantage of the savings and lasting quality inherent in Polyurethane Millwork.
 |
|
|
|
||
|
|
|
|
|
||
|